7. Align the printheads. See Align the printheads on page 328.
Clean the print-zone window
Clean the window with a cloth and deionized water.
Figure 11-15 Safety warnings
Prepare for cleaning
1. Ensure that you have an absorbent all-purpose cloth.
2. Ensure that the printer is not printing.
3. Turn off the printer.
4. If a job has just been printed, wait about 20 minutes for the printer to cool down.
5. You are recommended to wear gloves.
6. Ensure that all windows, covers, and doors are closed and remain in their original positions.
Clean the print-zone window
1. Open the top cover.
210 Chapter 11 Hardware maintenance
To Next Page
Loading...