3. If a job has just been printed, wait about 20 minutes for the printer to cool down.
4. You are recommended to wear gloves and mask.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
6. Turn off the printer.
Replace the heating-lamp filter
Table 11-13 Warning labels
Risk of burns Crush hazard Risk of trapped
finger
s
Hazardous moving
part
Light radiation
hazard
Electric shock
hazard
For more safety information, see Safety precautions on page 4
1. Open the top cover.
2. Locate the heating-lamp filter at the right of the top cover.
214 Chapter 11 Hardware maintenance
To Next Page
Loading...