5. At the front panel, tap the Settings icon , then Utilities > System tools > System checks >
Primer check, to test the primer functionality.
6. Tap tap the Settings icon
, then Utilities > Maintenance > Replace parts > Printer reset
counter > Reset printhead primer counter, to reset the usage of the replaced primer to zero.
Replace a service-station cap module
The following sections provide details for this topic.
Prepare for replacement
1. Ensure that you have the service station caps kit.
2. Ensure that the printer is not printing.
3. Turn off the printer.
4. If a job has just been printed, wait about 20 minutes for the printer to cool down.
5. You are recommended to wear gloves and goggles.
6. Ensure that all windows, covers, and doors are closed and remain in their original positions.
7. Move the print carriage manually to the left to access the capping station.
CAUTION: When moving the print carriage manually, do it slowly, and be careful not to crash it into
an
y other component or the sides of the printer.
Replace a service-station cap module
The following steps provide the complete procedure for this topic.
234 Chapter 11 Hardware maintenance
To Next Page
Loading...
