4. You are recommended to wear gloves.
5. Ensure that all windows, covers, and doors are closed and remain in their original positions.
6. Open the top cover.
7. Remove the build unit from the printer, if it is present.
8. Move the recoating unit manually to the front, slowly and carefully.
Replace the recoating roller and recoating plates
The following steps provide the complete procedure for this topic.
1. Locate the recoating unit and use a flat screwdriver to remove four T15 screws.
CAUTION: Be careful not to drop the screws.
Replace the recoating roller and recoating plates 253
To Next Page
Loading...
