3. Open the lid by pulling it up, and hang it on the structure.
4. Get the storage lid that came with the external tank when purchased and use it to close the tank.
5. Latch the lid.
6. Use a lift trolley to remove the tank to a storage area.
IMPORTANT: The tank should be stored in the same environmental conditions as specified for the
pr
ocessing station, otherwise the material may become unusable. The simplest solution is to keep
it in the same room as the processing station, well away from sources of heat or cold. Depending
on the material, it may be sensitive to temperature, humidity, or other factors.
304 Chapter 11 Hardware maintenance
To Next Page
Loading...