2. Attach the unpacking nozzle to the reusable material collector and leave it in the parking slot.
3. The processing station checks that the vane feeders are working correctly.
Clean the exterior of the build unit
The following sections provide details for this topic.
Prepare for cleaning
The following steps provide the complete procedure for this topic.
1. Ensure that you have an explosion-protected vacuum cleaner, an absorbent all-purpose cloth, and
deionized water (these things are not provided by HP).
2. You are recommended to wear gloves, mask, and goggles.
3. Remove the build unit from the processing station.
Clean the exterior of the build unit
The following steps provide the complete procedure for this topic.
1. Clean all top surfaces with a cloth dampened with deionized water.
2. Clean dust or material from the external surfaces and parts of the build unit: covers, handle, and
structure. You can use an explosion-protected vacuum cleaner with a soft brush nozzle.
3. Alternatively, you can wipe it with a dry cloth.
Clean the bottom area of the Build Unit
The following section provide details for this topic.
You need to clean the bottom sump area of the Build Unit every 100,000 layers. The bottom sump area is
display
ed in the following image:
316 Chapter 11 Hardware maintenance
To Next Page
Loading...