HP LaserJet 3015 - To set the fax header

5. Use the alphanumeric buttons to enter the current time.
6. Complete one of the following actions:
If you specified the 12-hour clock, use the < or the > button to move the cursor past the
fourth character. Select 1 for A.M. or 2 for P.M., and then press
MENU / ENTER .
If you specified the 24-hour clock, press
MENU / ENTER .
7. Use the alphanumeric buttons to enter the current date.
Make sure that you use two digits to specify the month and day, in that order (for
example, use “05” for May and “01” for the first day of the month of May).
8. Press
MENU / ENTER .
To set the fax header
To set or change the fax header information, complete the following steps. If you need help
entering any information, see
To enter text from the control panel.
1. On the control panel, press
MENU / ENTER .
2. Use the < or the > button to select Time/Date,Header, and then press
MENU / ENTER .
3. Use the < or the > button to select Fax Header, and then press
MENU / ENTER .
4. Use the alphanumeric buttons to enter your fax number, and then press
MENU / ENTER .
5. Use the alphanumeric buttons to enter your company name, and then press
MENU / ENTER .
Note
The maximum number of characters allowed in the fax number is 20. The maximum number
of characters allowed in the company name is 40.
22 Chapter 1 Fax Setup ENWW