Including the first page of each fax on the fax call report
If this option is turned on and the page image still exists in the device memory, the fax call
report includes a thumbnail (50-percent reduction) of the first page of the most recent fax
that was sent or received. The factory-set default for this option is On.
To include the first page of each fax on the fax call report
Use the following steps to include the first page of each fax on the fax call report:
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Reports, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Fax Call report, and then press
MENU
/
ENTER
.
4. Use the < or the > button to select Include 1st page, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select On or Off, and then press
MENU
/
ENTER
to confirm your
selection.
ENWW Including the first page of each fax on the fax call report 71
English