HP LaserJet 3015 - Making an extension telephone available to receive faxes; To make an extension telephone available to receive faxes

Making an extension telephone available to receive faxes
With this setting turned on, you can alert the device to pick up the incoming fax call by
pressing 1-2-3 sequentially on the telephone keypad (in tone-dial mode only). The default
setting is On. Turn this setting off only if you use pulse dialing or if you have a service from
your telephone company that also uses the 1-2-3 sequence. The telephone company
service does not work if it conflicts with the device.
To make an extension telephone available to receive faxes
1. Press MENU / ENTER .
2. Use the < or the > button to select Fax setup, and then press
MENU / ENTER .
3. Use the < or the > button to select Fax Recv. setup, and then press
MENU / ENTER .
4. Use the < or the > button to select Extension Phone, and then press
MENU / ENTER .
5. Use the < or the > button to select On or Off, and then press
MENU / ENTER to save your
selection.
ENWW Making an extension telephone available to receive faxes 61
English