HP LaserJet 3015 - Setting print times for the fax call report; To set the print times for the fax call report

Setting print times for the fax call report
You can set the device to print a fax call report after any of the following events:
● Every fax error (the factory-set default)
● Send fax error
● Receive fax error
● Every fax
● Send fax only
● Never
Note
If you select Never, you will have no indication that a fax failed to be transmitted unless you
print a fax activity log.
To set the print times for the fax call report
Use the following steps to set when the fax call report is printed:
1. Press
MENU / ENTER .
2. Use the < or the > button to select Reports, and then press
MENU / ENTER .
3. Use the < or the > button to select Fax Call report, and then press
MENU / ENTER .
4. Press the > button once to select Print report, and then press
MENU / ENTER .
5. Use the < or the > button to select the option for when you want the fax call reports to
be printed.
6. Press
MENU / ENTER to save your selection.
The following print-time options are available:
● Every error: The device prints a report each time an error occurs.
● Send error: The device prints a report when an error occurs while the device is sending
a fax.
● Receive error: The device prints a report when an error occurs while the device is
receiving a fax.
● Every fax: The device prints a report when a fax is sent or received.
● Send fax only: The device prints a report when a fax is sent.
● Never: A report is never printed.
70 Chapter 4 Fax Logs and Reports ENWW