Changing the sound-volume settings
Control the volume of the fax sounds from the device control panel. You can make changes
to the following sounds:
ā The fax sounds that are associated with incoming and outgoing faxes
ā The ring for incoming faxes
The factory-set default for the fax-sounds volume is Soft. For general information about
controlling volume settings, see the electronic User Guide.
To change the fax-sounds (line-monitor) volume (HP LaserJet
3015)
Complete the following steps to change the fax-sound volume on the the HP LaserJet 3015
all-in-one.
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Common settings, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Volume settings, and then press
MENU
/
ENTER
.
4. Use the < or the > button to select PhoneLine Volume, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select Off, Soft, Medium,orLoud.
6. Press
MENU
/
ENTER
to save your selection.
To change the fax-sounds (line-monitor) volume (HP LaserJet
3030 all-in-one or the HP LaserJet 3380 all-in-one)
Complete the following steps to change the fax-sounds volume on the HP LaserJet 3030 all-
in-one or the HP LaserJet 3380 all-in-one.
1. Press
VOLUME
on the control panel.
2. Use the < or the > button to select Off, Soft, Medium,orLoud.
3. Press
MENU
/
ENTER
to save your selection.
To change the ring volume
When the device is initially receiving a call, a ring alert is audible. The ring duration length is
based on the local telephone company ring-pattern length. The factory-set default for the
ring volume is Soft.
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Common settings, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Volume settings, and then press
MENU
/
ENTER
.
4. Press the > button once to select Ring volume, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select Off, Soft, Medium,orLoud.
6. Press
MENU
/
ENTER
to save your selection.
46 Chapter 2 Faxing (basic) ENWW
To Next Page
Loading...
