Changing the default glass-size setting
Note
This feature is not available with the HP LaserJet 3015 all-in-one.
This setting determines what paper size the flatbed scanner scans when you send a fax
from the scanner. The factory-set default is determined by the region/country in which you
purchased the device.
To change the default glass-size setting
1. Press
MENU
/
ENTER
.
2. Use the < or the > button to select Fax setup, and then press
MENU
/
ENTER
.
3. Use the < or the > button to select Fax Send setup, and then press
MENU
/
ENTER
.
4. Use the < or the > button to select Def. Glass Size, and then press
MENU
/
ENTER
.
5. Use the < or the > button to select the correct paper size setting.
6. Press
MENU
/
ENTER
to save your selection.
The following glass-size settings are available:
ā HP LaserJet 3030 all-in-one: A4 or Letter
ā HP LaserJet 3380 all-in-one: A4, Letter,orLegal
36 Chapter 2 Faxing (basic) ENWW