HP LaserJet 3015 - Canceling a fax job; To cancel the current fax job; To cancel a fax job by using the Fax Job Status

Canceling a fax job
Use these instructions to cancel a single fax that is currently dialing or a fax that is being
transmitted or received.
To cancel the current fax job
Press CANCEL on the control panel. Any pages that have not been transmitted are canceled.
Pressing
CANCEL also stops group-dial jobs.
To cancel a fax job by using the Fax Job Status
Use this procedure to cancel a fax job in the following situations:
● The device is waiting to redial after encountering a busy signal, an unanswered call, or
a communication error.
● The fax is scheduled to be sent at a future time.
Use the following steps to cancel a fax job by using the Fax Job Status:
1. Press
MENU / ENTER .
2. Press
MENU / ENTER to select Fax Job status.
3. Use the < or the > button to scroll through pending jobs until you reach the job that you
want to clear.
4. Press
MENU / ENTER to select the job that you want to cancel.
5. Press
MENU / ENTER to confirm that you want to cancel the job.
ENWW Canceling a fax job 31
English