297
undo event
Default
No interface events are configured.
Views
CLI-defined policy view
Predefined user roles
network-admin
Parameters
interface-type interface-number: Specifies an interface by its type and number.
monitor-obj monitor-obj: Specifies the traffic statistic to be monitored on the interface. For keywords
available for the monitor-obj argument, see Table 61.
star
t-op star
t-op: Specifies the operator for comparing the monitored traffic statistic with the start
threshold. The start threshold is crossed if the comparison result meets the condition. For keywords
available for the start-op argument, see Table 62.
star
t-v
al start-val: Specifies the start threshold to be compared with the monitored traffic statistic. The
value range is 0 to 4294967295.
restart-op restart-op: Specifies the operator for comparing the monitored traffic statistic with the restart
threshold. The restart threshold is crossed if the comparison result meets the condition. For keywords
available for the restart-op argument, see Table 62.
re
s
tart-val restart-val: Specifies the restart threshold to be compared with the monitored traffic statistic.
The value range is 0 to 4294967295.
interval interval: Specifies the interval to sample the monitored traffic statistic for a comparison. The value
range is 1 to 4294967295 seconds. The default is 300 seconds.
Table 61 Monitored objects
Monitored traffic statistic Descri
tion
input-drops Number of discarded incoming packets.
input-errors Number of incoming error packets.
output-drops Number of discarded outgoing packets.
output-errors Number of outgoing error packets.
rcv-bps Receive rate, in bps.
rcv-broadcasts Number of incoming broadcasts.
rcv-pps Receive rate, in packets per second.
tx-bps
Transmit rate, in bps.
tx-pps Transmit rate, in packets per second.
Table 62 Comparison operators
Com
arison o
erator Descri
tion
eq Equal to.
ge Greater than or equal to.
To Next Page
Loading...
Need help?
General
