HP NonStop NS-series

Overview of Monitoring and Recovery
HP Integrity NonStop NS-Series Operations Guide—529869-005
3-17
Automating Routine System Monitoring
Example 3-3. System Monitoring Output File (page 1 of 3)
COMMENT THIS IS THE FILE SYSCHK
COMMENT THIS CHECKS ALL DISKS:
SCF STATUS DISK $*
STORAGE - Status DISK \SHARK.$DATA12
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
52 *STARTED STARTED *STARTED STARTED 3,262 2,263
STORAGE - Status DISK \SHARK.$DATA01
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
63 *STARTED STARTED *STARTED STARTED 0,267 1,266
STORAGE - Status DISK \SHARK.$DATA04
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
60 *STARTED STARTED *STARTED STARTED 0,270 1,263
STORAGE - Status DISK \SHARK.$SYSTEM
LDev Primary Backup Mirror MirrorBackup Primary Backup
PID PID
6 *STARTED STARTED STOPPED STOPPED 0,256 1,256
COMMENT THIS CHECKS ALL TAPE DRIVES:
SCF STATUS TAPE $*
STORAGE - Status TAPE $TAPE1
LDev State SubState Primary Backup DeviceStatus
PID PID
48 STARTED 0,274
STORAGE - Status TAPE $TAPE0
LDev State SubState Primary Backup DeviceStatus
PID PID
49 STARTED 0,273
COMMENT THIS CHECKS THE SPOOLER PRINT DEVICES:
SPOOLCOM DEV
DEVICE STATE FLAGS PROC FORM
$LINE1 WAITING H $SPLX
$LINE2 WAITING H $SPLX
$LINE3 WAITING H $SPLX
$LASER WAITING H $SPLP