HP NonStop NS-series - Page 90

Communications Subsystems: Monitoring and
Recovery
HP Integrity NonStop NS-Series Operations Guide—529869-005
6-8
Monitoring the WAN Subsystem
Monitoring WAN Processes
To display the status of all WAN subsystem processes—configuration managers,
TCP/IP processes, WANBoot processes:
> SCF STATUS PROCESS $ZZWAN.*
The system displays a listing similar to:
To monitor a single WANBoot process, type:
> SCF STATUS PROCESS $ZZWAN.#boot-process
The system displays a listing similar to:
-> STATUS PROCESS $ZZWAN.*
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#5
State :......... STARTED
LDEV Number..... 66
PPIN............ 5 ,264 Process traced.. NO
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#4
State :......... STARTED
LDEV Number..... 67
PPIN............ 4 ,264 Process traced.. NO
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#ZTF00
State :......... STARTED
PPIN............ 4 ,342
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#SWB1
State :......... STARTED
PPIN............ 4 ,275 BPIN............ 5 ,302
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#ZTF01
State :......... STARTED
PPIN............ 5 ,340
WAN Manager STATUS PROCESS for PROCESS \COMM.$ZZWAN.#SWB0
State :......... STARTED
PPIN............ 4 ,274 BPIN............ 5 ,303
-> status PROCESS $ZZWAN.#ZB017
WAN Manager STATUS PROCESS for PROCESS \ICEBAT.$ZZWAN.#ZB017
STATE:...........STARTED
PPIN.............0 ,278 BPIN.............0, 282