Using the Dock
Understanding the Basics
1-11
Understanding the Basics
Docking the OmniBook to the dock is just like simultaneously adding several
devices to the OmniBook. Docking causes Windows 95 or Windows 98 to create a
new hardware profile. The default hardware profile shipped with the OmniBook is
an undocked profile.
Note
If you are using Windows NT on your system and your system does not have a
docked hardware profile, you need to create a docked profile for your OmniBook.
See “To create a docked hardware profile” on page 1- 23 for instructions.
This section shows you how to get your dock and OmniBook up and running
quickly, including how to
• Set up the dock.
• Dock the OmniBook.
• Undock the OmniBook.
• Turn the OmniBook on and off
• Attach a security cable.
To Next Page
Loading...
Need help?
General