2-12
Status Pages
Clock
For instructions on configuring the system time, see “Simple Network Time Protocol” on page 3-3,
“Time Zone” on page 3-4, and “Daylight Savings Time” on page 3-5.
Daylight Savings Time
Daylight Savings Time Shows whether Daylight Savings Time is enabled and the mode of operation:
• Disabled—No clock adjustment will be made for Daylight Savings Time.
• Recurring—The settings will be in effect for the upcoming period and subsequent years.
• Non-Recurring—The settings will be in effect for only one period (i.e., they will not carry
forward to subsequent years).
Start Time settings /
End Time settings
Shows the following to indicate when the change to Daylight Savings time occurs and when
it ends. The fields that display here depend on which Daylight Savings Mode is configured.
• Week—The number of weeks into the month when the change to/from Daylight Savings
Time occurs. (This field is available only when the Daylight Savings Time mode is set to
Recurring.)
• Day—The day of the week when the change to/from Daylight Savings Time occurs.
• Month—Set the month when the change to/from Daylight Savings time occurs.
• Hours—Set the hour of the day when the change to/from Daylight Savings Time occurs.
• Minutes—Set the minutes in the hour when the change to/from Daylight Savings Time
occurs.
Offset The time amount of time in minutes to advance the clock during Daylight Savings Time.
Field Description
To Next Page
Loading...
