To Next Page

To Previous Page

9-5

Diagnostics

Support File

Use the support file page to display summary information for the switch on a single page. The support

file page includes the following data:

■ System description

■ The active Image and the image that will be active after a reboot, and the user-configured

descriptions of these images.

■ Buffered log messages

■ Logging configuration details

■ IP configuration details

■ Port configuration details

■ Jumbo frames configuration details

■ Green mode administrative status

■ MAC address forwarding table and summary statistics

■ VLAN configuration and membership details

■ Trunk configuration details

■ LLDP configuration, global statistics, and local and remote device summaries

■ Port mirroring configuration

■ Loop protection status per interface

To access this page, click Diagnostics > Support File in the navigation pane.

This data also displays on status pages for each particular feature. For descriptions of these items,

refer to the related sections in this document.

To save the Support File data to a file, click Save As located at the bottom of the page.

You can print the text from your text editor. Alternatively, your browser may support printing only the

frame that contains the data (that is, it excludes the navigation pane and Web Applet) directly from the

Web page. Right-click the data area to see if your browser provides this option.

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 1810G and is the answer not in the manual?

HP ProCurve 1810G Specifications

General