HP ProCurve 1810G User Manual

3-5
Network Setup
Daylight Savings Time
Daylight Savings Time
Use this page to configure if and when Daylight Savings Time (DST) occurs for your time zone. When
configured, the system time will adjust automatically during Daylight Savings Time.
To display the Time Zone page, click Network Setup > Daylight Savings Time in the navigation pane. The
page displays differently depending on the mode selected in the Daylight Savings Time field. In the
following figure, the mode is set to Recurring.
Figure 3-4. Daylight Savings Time Page

HP ProCurve 1810G Specifications

General

Model	HP ProCurve 1810G
Layer	Layer 2
Power Supply	Internal
VLAN Support	Yes, up to 256 VLANs
Ports	8 or 24 10/100/1000 ports
Management	Web-managed
Switching Capacity	16 Gbps (8-port), 48 Gbps (24-port)
Form Factor	Rack-mountable
Forwarding Rate	11.9 Mpps (24-port model)
Jumbo Frame Support	Yes
Quality of Service (QoS)	Yes
Operating Temperature	0°C to 40°C
Operating Humidity	15% to 95% non-condensing