To Next Page

To Previous Page

10-4

Maintenance Pages

Update Manager

Update Manager enables a new image or configuration file to be uploaded from the local system or

network to the switch. To access this page, click Maintenance > Update Manager in the navigation pane.

Update Manager displays different options depending on the transfer protocol, file or image type

selected for an update. In the example in Figure 10-2, the inactive (or “Backup”) image on the switch

is being updated with the file named switchdrvr.stk from a TFTP server. For example, if the image1

file is being used as the currently-active image running on the switch, then the image2 file is the backup

file to be updated.

Figure 10-2. Update Manager Page

Table 10-2. Update Manager Fields

Field Description

Update Method Select the protocol to use:

• HTTP—The file is downloaded using HTTP from a local or remote drive.

• TFTP—The file is downloaded using TFTP from a TFTP server operating on the system/

network.

Browse for file

(HTTP upload only)

If HTTP is used for the software update, click Browse to select the designated file.

Note: If the file name differs from the default name on the switch, the file will be renamed to the

default name when uploaded (see the Update Type field description).

Server IP

(TFTP upload only)

If a TFTP download is performed, enter the IP address of the TFTP server.

File Name

(TFTP upload only)

If a TFTP download is performed, enter the name of the software update file on the TFTP server.

Questions and Answers:

Need help?

Do you have a question about the HP ProCurve 1810G and is the answer not in the manual?

HP ProCurve 1810G Specifications

General