Hardware options installation 96
5.
Remove the air baffle (on page 28).
6. Remove the primary PCI riser cage ("Remove the PCI riser cages" on page 26).
7. If you already have an FlexibleLOM Adapter on hand, install the option in the FlexibleLOM riser
cage:
a. Remove the cover opposite the FlexibleLOM riser slot.
b. Install the FlexibleLOM adapter.
8. Install the FlexibleLOM riser cage:
a. Align the riser board with the corresponding connector on the system board, and then press
down the FlexibleLOM riser cage.
To Next Page
Loading...
