13. Alternately and evenly tighten the liquid cooling unit/CPU 1 mounting screws to a torque of 6 in./
lbs.
Figure 5-64 Tighten liquid cooling unit/CPU 1 mounting screws
14. Lower the radiator to its closing position.
15. Alternately and evenly tighten the liquid cooling unit/CPU 0 mounting screws to a torque of 6 in./
lbs.
Figure 5-65 Tighten liquid cooling unit/CPU 0 mounting screws
ENWW Removing and replacing components 107
To Next Page
Loading...
