EasyManua.ls Logo

HP ZBook Fury G11

HP ZBook Fury G11
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 7-19 Issues, possible causes, and fixes (continued)
Items Procedures
Troubleshooting steps
1. Update BIOS and drivers. (4. Update BIOS and drivers on page 99)
2. Perform hard reset (8. Hard reset on page 105)
3. Perform soft reset (9. Soft reset (Default Settings) on page 106)
Power-related issue
1. Verify functionality of AC adapter alone. If it does not work, test with a verified
working adapter.
2. Verify battery alone. Verify that battery is not depleted. Test battery using HP PC
Hardware Diagnostics (UEFI) tool.
3. Verify connection of power button and cable.
OS custom settings
1. Advise users to reset power options and close all applications that are not in use,
including applications in the background.
2. Test with a confirmed working operating system to isolate custom settings by
users or any conflicting applications that cause shutdown.
The following steps are for authorized providers or technicians.
Thermal-related issue
1. Verify thermal condition:
a. Test fan using HP PC Hardware Diagnostics (UEFI) tool (6. HP Hardware
Diagnostics and Tools on page 99)
b. Check fan and connection. Reseat fan cable.
c. Be sure that no obstructions or dust are in heat sink fan, fin, or vent.
d. Test with a verified working fan.
e. Remove old thermal compound and pads and replace with new compound
and pads.
2. Verify thermal solution:
Use Thermal Monitor tool (available only to authorized service providers/
technicians) to perform stress test (processor and GPU) (
6. HP Hardware
Diagnostics and Tools on page 99), and verify that thermal sensors are within
limits after thermal condition is serviced.
Hardware-related issue
1. Check for any signs of loose connections, bent pins, stray wires, dust, nearly faulty
parts (bulging/leaking capacitor).
2. Verify that lights are solid.
3. If shutdown is reproducible, test essential hardware configuration:
a. If no issue with hardware configuration, reinstall one nonessential component
at a time to determine faulty hardware.
b. If issue persists, replace essential hardware with a confirmed working part,
one at a time. If the computer does not boot, replace system board.
Intermittent shutdown 123

Table of Contents

Related product manuals