2. Detach the NFC module antenna (2) from the touchpad. The antenna is attached with double-sided
adhesive.
To replace the NFC module antenna, reverse the removal procedures.
NFC module
To remove the NFC module, use this procedure and illustration.
Table 6-1
NFC module description and part number
Description Spare part number
NFC module
NOTE: The NFC module antenna is included with the touchpad spare part kit with spare part number
N50690-001. The NFC module cable is included in the Cable Kit, spare part number N19223-001.
N19236-001
Before removing the NFC module, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
2. Remove the service cover (see Service cover on page 41).
3. Remove the battery (see Battery on page 42).
Remove the NFC module:
1. Disconnect the NFC module antenna (1) from the NFC module.
2. Disconnect the NFC module cable (2) from the NFC module.
NFC module
57
To Next Page
Loading...
