1. Disconnect the following cables from the keyboard hub:
● Fingerprint reader cable (ZIF) (1)
● Keyboard cable (ZIF) (2)
● RGB cable (ZIF) (3)
● Backlight cable (ZIF) (4)
● Touchpad cable (ZIF) (5)
● NFC module cable (ZIF) (6)
● Keyboard hub cable (ZIF) (7)
2. Detach the keyboard hub (8) from the computer. The keyboard hub is attached with double-sided
adhesive.
To install the keyboard hub, reverse the removal procedures.
Touchpad
To remove the touchpad, use this procedure and illustration.
Table 6-13
Touchpad descriptions and part numbers
Description Spare part number
Touchpad
NOTE: The touchpad spare part kit does not include the touchpad cable. The touchpad cable is
available in the Cable Kit, spare part number N19223-001.
With NFC module antenna N50690-001
Without NFC module antenna N50689-001
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 41).
Touchpad
77
To Next Page
Loading...
