3. When installing memory modules, be sure to install the memory modules into the memory module
slots in sequential order, as shown in the following illustration.
The first memory module is installed in memory module slot (1), the second memory module is
installed in memory module slot (2), the third memory module is installed in memory module slot (3),
and the fourth memory module is installed in memory module slot (4).
Solid-state drive
To remove the SSD, use this procedure and illustration.
Table 5-6
Solid-state drive descriptions and part numbers
Description Spare part number
4 TB, PCIe-4×4, TLC
NOTE: To ensure correct operation, the 4 TB SSD must be installed in drive slot 2 or 4.
N06219-001
2 TB, PCIe-4×4, TLC M52027-001
2 TB, PCIe-4×4, SED, TLC M23414-001
2 TB, PCIe-4×4, TLC, for use in the People's Republic of China N77396-001
1 TB, PCIe-4×4, TLC N16560-001
1 TB, PCIe-4×4, SED, TLC M52033-001
1 TB, PCIe-4×4, TLC, NMIC N22908-001
1 TB, PCIe-4×4, SED, TLC, NMIC N24954-001
1 TB, PCIe-4×4, TLC, for use in the People's Republic of China N77395-001
512 GB, PCIe-4×4, TLC N17436-001
512 GB, PCIe-4×4, SED, TLC M52031-001
512 GB, PCIe-4×4, TLC, NMIC N22907-001
512 GB, PCIe-4×4, SED, TLC, NMIC N54573-001
Solid-state drive 51
To Next Page
Loading...
