EasyManua.ls Logo

HP ZBook Fury G11

HP ZBook Fury G11
208 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Table 7-55 POST error messages and user actions to address the error (continued)
Test description Failure descriptions Error code Possible user actions
Hard Disk Test Hard Disk 2 Full 306 The hard drive might have failed. Contact support for assistance.
Boot Device
Manager
Boot device not
found
3F0 This code indicates a potential problem with the hard drive. Run the
hard drive test.
See https://support.hp.com/emea_africa-en/document/c01443371 for
more information.
Boot Device
Manager
Hard Disk 1 Error 3F1 Indicates a potential problem with the hard drive. Run the hard drive
test.
See https://support.hp.com/emea_africa-en/document/c01443371 for
more information.
Boot Device
Manager
Hard Disk 2 Error 3F2 This code indicates a potential problem with the hard drive. Run the
hard drive test.
See https://support.hp.com/emea_africa-en/document/c01443371 for
more information.
Boot Device
Manager
Hard Disk 1 SMART 301 This code indicates a potential problem with the hard drive. Run the
hard drive test.
See https://support.hp.com/emea_africa-en/document/c01443371 for
more information.
Boot Device
Manager
Hard Disk 2 SMART 302 This code indicates a potential problem with the hard drive. Run the
hard drive test.
See https://support.hp.com/emea_africa-en/document/c01443371 for
more information.
BIOS Recovery BIOS Recovery
Occurred
500 This message indicates that BIOS recovery was completed
successfully. No further action is required.
BIOS Application BIOS Application
Error
501 The BIOS installation might have become corrupted. Download the
latest version of the BIOS and install it. See 4. Update BIOS and drivers
on page 99 for more information.
If reinstalling the BIOS fails, contact support for further assistance.
CMOS Recovery CMOS Recovery
Occurred
502 This message indicates that CMOS recovery was completed
successfully. No further action is required.
Battery Check Primary Battery
Replace
601 This code indicates that the primary battery has very low capacity.
Search http://www.hp.com/support for details about using the HP
Support Assistant to verify the battery capacity and, if necessary,
order a replacement.
Battery Check Secondary Battery
Replace
602 This indicates that the secondary battery has very low capacity.
Search http://www.hp.com/support for details about using the HP
Support Assistant to verify the battery capacity and, if necessary,
order a replacement.
Wireless Module Not installed or
responding
701 Reseat the wireless LAN adapter module, if your notebook supports it.
Because seating or reseating a wireless LAN adapter is unique to
each computer model.
158 Chapter 7 Troubleshooting guide

Table of Contents

Related product manuals