11. Place the processor-heatsink module on a flat work surface with its contact side facing up.
12. CAUTION:CAUTION: Do not press down on the dust cover. Pressing down on the dust cover might damage the processor socket.
If you are not immediately installing the replacement processor-heatsink module, install the dust cover on the empty processor socket:
a. Press and hold the grip tabs on the dust cover (callout 1).
b. Carefully lower the dust cover onto the bolster plate guide posts (callout 2).
Make sure that the corner holes of the dust cover are properly engaged with the guide posts on the bolster plate.
13. CAUTION:CAUTION:
THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED.THE PINS ON THE PROCESSOR SOCKET AND ON THE PROCESSOR ARE VERY FRAGILE AND EASILY DAMAGED. Any
damage to them might require replacing the system board.
To Next Page
Loading...
