Hardware options installation 109
o
For tower models, place the server on a flat, level surface with the access panel facing up.
o For rack models, extend the server from the rack (on page 34).
6. Remove the access panel (on page 32).
7. Remove the air baffle (on page 34).
8. Remove the fan cage (on page 37).
9. Remove the LFF drive cage blank ("Remove a drive cage blank" on page 39).
10. Remove the divider between drive cages 1 and 3, and 2 and 4.
11. Install the media cage.
12. Install the media device.
To Next Page
Loading...
