HPE ProLiant ML350 Gen9 - Page 78

Hardware options installation 78
a.
Connect the HBA to Expander Mini-SAS X cable (788456-001) from the Host Bus Adapter to the
Expander card. Connect port 1 to port 1 and port 2 to port 2.
b. Connect the Smart Array to Expander Mini-SAS Y cable (779300-001) from the Smart Array
controller to the Expander card ports 1 and 2.
12. Connect the three Expander to backplane Mini-SAS X cables (778556-001) from the Expander card
to each backplane according to the table below:
Expander
connectors
LFF configuration SFF configuration
Port 3
Port 4
Box 1
Box 4
Port 5
Port 6
Box 2
Box 5
Port 7
Port 8
Box 3
Box 6