hpmont HD30 Series - Page 153

Shenzhen Hpmont Technology Co., Ltd Appendix A Parameters
HD30 Series Inverters User Manual －145－
No. Name Range
Factory
Default
Unit
Modified
attributes
Setting
2: 4800bps
3: 9600bps
4: 19200bps
5: 38400bps
F17.02 Local address 0－247 2 1 ×
F17.03 Host PC response time 0－1000ms 0ms 1ms ×
F17.04
Time threshold for
detecting
communication status
0.0－1000.0s
When F17.04 = 0, it will not
detect communication time
out.
0.0s 0.1s ×
F17.05
Detecting time at
communication error
0.0－1000.0s
When F17.05 = 0, it will not
detect the communication
error.
0.0s 0.1s ×
F17.06
Action selection at
communication time
out
0: Coast to stop
1: Emergency stop
2: Decelerate to stop
3: Continue to run
3 1 ×
F17.07
Action selection at
communication fault
3 1 ×
F17.08
Action selection at
communication
peripheral device fault
1 1 ×
Group F18 Display Control Parameters (refer to pages 97
－
99)
F18.00 Language selection
0: Chinese
1: English
0 1 ○
F18.01
Displaying contrast of
the LCD display panel
1－10 5 1 ○
0: Reserved
1: Inverter’s rated current
2: Inverter’s extension
function
F18.02
Set the display
parameter 1 during
operation
3: Inverter status
4: Master setting frequency
source
7 1 ○
5: Master setting frequency
6: Auxiliary setting frequency
F18.03
Set the display
parameter 2 during
operation
7: Setting frequency
8: Reference frequency (after
acceleration/ deceleration)
8 1 ○
9: Output frequency
10: Setting speed
F18.04
Set the display
parameter 3 during
operation
11: Running speed
12: Three-phase power
supply input phase sequence
9 1 ○
13: Output voltage
A