Service Information
1-10
Frame
Material Item Remarks
Multi-purpose grease Front/rear wheel dust seal lip
Axle surface
Swingarm pivot bolt surface
Urea based multi-purpose Steering stem upper/lower bearings 3 – 5 g
grease for extreme pressure Steering stem dust seal 3 – 5 g
(example: EXCELITE EP2 Steering stem adjusting nut threads 0.1 – 0.3 g
manufactured by KYODO
YUSHI, Japan) or equivalent
Multi-purpose grease Swingarm pivot bolt bearing
(Shell Alvania EP2 or Swingarm pivot dust seal lips
equivalent) Shock link needle bearing
Shock link dust seal lips
Rear shock absorber needle bearing
Rear shock absorber dust seal lips
Engine oil Swingarm pivot adjusting bolt threads
Each O-ring
Silicone grease Front/rear brake push rod/master piston contact area
Brake lever pivot bolt sliding surface
Rear brake caliper pin sliding surface
Rear brake caliper pad pin, O-ring
DOT 4 Brake fluid Brake master piston, piston cups
Brake master cylinder/caliper cylinder I.D.
Fork fluid Fork inside
Fork oil seal lip
Locking agent Front caliper assembly torx bolt threads
To Next Page
Loading...
