HS-Technik NutBee NBPS-21 User Manual

- 33 -
 
19320012
SCAN IO
234
The scan of the barcode with the number "234" was successful.
P01 000/003
ENABLE 1
234
The tool is enabled for three rivet nuts with program 1. "234" corre-
sponds to the barcode scanned for the enabling.
HST-Tool-Manager display seng:
Signals - OLED-display - Enable display: Barcode
P01 000/003
ENABLE 1
7.00
kN
The tool is enabled for three rivet nuts with program 1.
7.00 kN corresponds to the target force from program 1.
HST-Tool-Manager display seng:
Signals - OLED-display - Enable display: Target value
P01 000/003
RUN R
234
The tool is enabled for three rivet nuts with program 1. The riveng
process is currently in progress. This is indicated by "Run R". "234"
corresponds to the ID of the riveng.
SCANNER
Select the scanner to scan the Wi-Fi sengs in the Setup menu.
Setup menu sengs in the HST-Tool-Manager:
General - Funcons - Setup menu - Scanner selectable
Aer selecng the scanner in the Setup menu with the start buon, the
selecon must either be conrmed or discarded with the white display
keys.
19320012
SCAN OK
Scanner
The scanning of the Wi-Fi settings was successful.
19320012
PLEASE SCAN
Scanner
The scanning of the Wi-Fi settings was not successful.
P01 001/001
QUIT
Tool requires acknowledgement aer NOK seng process.
P01 001/001
NOK CONFIRM
QUIT
OK
NOK seng process successfully acknowledged.

HS-Technik NutBee NBPS-21 Specifications

General

Brand	HS-Technik
Model	NutBee NBPS-21
Category	Rivet Tools
Language	English