HTC Sprint One M8 - Control Your TV with HTC Remote; Control Your TV from the Notifications Panel

Apps and Entertainment 127
Note:SwipetotheMOREtabtoaddandconfiguremorebuttons.
4. AligntheIRportonyourphonewiththeIRportonyourdevice’sremotecontrol.Yourphoneand
yourdevice’sremotecontrolshouldbelessthan2in(5cm)apart.
5. Onyourdevice’sremotecontrol,touchandholdthebuttonyouwanttoaddtoyourphone.
6. Touchtheblinkingonscreenbuttontotestthebutton.
7. TouchYestofinishsettingupthebutton.
Note:IfyoutouchNo,you’llbepromptedtotryagain.
8.
Touch untilyouexittheButtonsetupmode.
Control Your TV with HTC Remote
StartusingyourphoneasyourTVremotecontrol.
1.
Touch > >TV.
2.
Touch .
3. Doanyofthefollowing:
l Turn the TV, set top box, or home theater system on or off.OnthePOWER &
INPUTtab,touchtheOn,Off,ON/OFFbuttonunderthedevicename.
l Change the input source for the TV or home theater system.OnthePOWER &
INPUTtab,touchtheInputbuttonunderthedevicename.
l Change channels, adjust or mute the volume, and more.GototheCH/VOLtab.
l Enter channel numbers directly.GototheNUMBER PADtab.
l
Switch between recently watched channels.OntheNUMBER PADtab,touch .You
canalsoswitchtoarecentlywatchedchannelintheNotificationspanel.
l Access the playback controls.GototheCH/VOLtab.
Tip:ToautomaticallyturnonthedisplaywhenyoupickupyourphonewhileusingtheTVapp,select
theAuto Wakeoptionin >Settings.
Control Your TV From the Notifications Panel
YoucaneasilyuseyourphonetomutetheTVandmore.