LTE TDD B2268H
User Guide
3 Connection Status and System Info
Copyright © Huawei Technologies Co., Ltd.
Each field is described in the following table.
Table 3-1 System Info Screen
Select the web configurator language from the drop-down list box.
Select how often you want the LTE Device to update this screen from
the drop-down list box.
This field displays the LTE Device system name. It is used for
identification. You can change this in the Maintenance > System
screen's Host Name field.
This is the model name of your device.
This is the MAC (Media Access Control) or Ethernet address unique to
your LTE Device.
This field displays the current version of the firmware inside the
device. It also shows the date the firmware version was created. Go to
the Maintenance > Firmware Upgrade screen to change it.
This is the method of encapsulation used by your ISP.
This field displays the current IP address of the LTE Device in the
WAN.
This field displays the current IP address of the LTE Device in the
LAN.
This field displays the current subnet mask in the LAN.
This field displays what DHCP services the LTE Device is providing
to the LAN. Choices are:
Server - The LTE Device is a DHCP server in the LAN. It assigns IP
addresses to other computers in the LAN.
None - The LTE Device is not providing DHCP services to the LAN.
This field displays the static IPv6 address and the prefix length the
LTE Device uses for the LAN IPv6 address.
This field displays a unique address the LTE Device generates itself
for the LAN.
This field displays the IPv6 IP address of the DHCPv6 server.
This field displays the IP address for another logical LAN interface on
the LTE Device.
This field displays the subnet mask of the logical LAN network.
To Next Page
Loading...
