LTE TDD B2268H
User Guide
3 Connection Status and System Info
Copyright © Huawei Technologies Co., Ltd.
This is the channel number used by the LTE Device now.
Configured displays when a wireless client has connected to the LTE
Device or WPS is enabled and wireless or wireless security settings
have been configured. Unconfigured displays if WPS is disabled or
wireless security settings have not been configured.
This is the descriptive name used to identify the LTE Device in the
wireless LAN.
This shows whether or not the SSID is enabled (on).
This displays the type of security the LTE Device is using in the
wireless LAN.
This displays 4G LTE if there is an LTE connection, otherwise, it
displays N/A.
This displays PIN disable if SIM card needs PIN or PUK to unlock, it
displays PIN required or PUK required.
This displays the strength of the LTE connection that the LTE Device
has with the base station which is also known as eNodeB or eNB.
This displays the service provider's name of the connected LTE
Network.
This displays LTE if there is an LTE connection.
This displays how long the LTE connection has been available since it
was last established successfully.
This displays the RSRP strength of the LTE connection that the LTE
Device has with the base station which is also known as eNodeB or
eNB.
This displays the SINR strength of the LTE connection that the LTE
Device has with the base station which is also known as eNodeB or
eNB.
This displays the firmware version of the outdoor unit.
This displays the firmware version of LTE module.
This displays the LTE Device’s International Mobile Equipment
Identity number (IMEI). An IMEI is a unique ID used to identify a
mobile device.
This displays the International Mobile Subscriber Identity (IMSI) of
the SIM card inserted in the outdoor unit. An IMSI is a unique ID used
To Next Page
Loading...
