Huawei B2268H - Page 26

LTE TDD B2268H
User Guide
3 Connection Status and System Info
Issue 01 (2014-01-15)
Copyright © Huawei Technologies Co., Ltd.
19
LABEL
DESCRIPTION
to identify a mobile subscriber in a mobile network.
Interface Status
Interface
This column displays each interface the LTE Device has.
Status
This field indicates whether or not the LTE Device is using the
interface.
For the LTE WAN interface, this field displays Up when the LTE
Device is connected to an LTE network and Down when the LTE
Device does not have an LTE connection.
For the LAN interface, this field displays Up when the LTE Device is
using the interface and Down when the LTE Device is not using the
interface.
For the WLAN interface, it displays Up when WLAN is enabled or
Down when WLAN is disabled.
Rate
For the LTE WAN interface, this displays 4G LTE if there is an LTE
connection.
For the LAN interface, this displays the port speed and duplex setting.
For the WLAN interface, it displays the maximum transmission rate
when WLAN is enabled or N/A when WLAN is disabled.
System Status
System Up Time
This field displays how long the LTE Device has been running since it
last started up. The LTE Device starts up when you plug it in, when
you restart it (Maintenance > Reboot), or when you reset it (see
Section 1.7).
Current Date/Time
This field displays the current date and time in the LTE Device. You
can change this in Maintenance > Time Setting.
System Resource
CPU Usage
This field displays what percentage of the LTE Device's processing
ability is currently used. When this percentage is close to 100%, the
LTE Device is running at full load, and the throughput is not going to
improve anymore. If you want some applications to have more
throughput, other applications should be turned off.
Memory Usage
This field displays what percentage of the LTE Device's memory is
currently used. Usually, this percentage should not increase much. If
memory usage does get close to 100%, the LTE Device is probably
becoming unstable, and you should restart the device. See Chapter 23,
or turn off the device (unplug the power) for a few seconds.
Registration Status
Account
This column displays each SIP account in the LTE Device.
Action
This field displays the current registration status of the SIP account.
You have to register SIP accounts with a SIP server to use VoIP.
If the SIP account is already registered with the SIP server,

Click Unregister to delete the SIP account's registration in the SIP