EasyManua.ls Logo

Huawei eSpace 8850 - Setting the Cordless Handset; Setting the Ringtone and the Ringtone Volume; Setting the Key Tone

Huawei eSpace 8850
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
l To power off the handset, press and hold until "Goodbye!" is displayed.
NOTE
l Release when Goodbye is displayed. Otherwise, the handset may be restarted.
l If the battery level is very low, nothing will be displayed on the display. It is recommended that you
fully charge the handset before use.
l If the handset is to be unused for a prolonged period, remove the battery from the handset. This will
protect against excessive discharge of the battery.
Locking the Handset Keypad
l To lock the keypad, press and hold
in standby mode until the icon is displayed
on the LCD.
l To unlock the keypad, press and hold
again until the icon disappears from the
LCD.
When the keypad is locked, all buttons except the Answer button are locked. An incoming call
can be answered by selecting Answer. When the call ends, the keypad remains locked.
7.2 Setting the Cordless Handset
7.2.1 Setting the Ringtone and the Ringtone Volume
1. In standby mode, press MENU to display the main menu.
2. Use the navigation buttons to highlight Sound, and then select Select or press OK.
3. Use the up or down navigation button to highlight VOIP ringtone, PSTN ringtone, or
INT ringtone as required, and then select Select.
4. Use the left or right navigation button to select a ringtone as required. Select Select to save
the setting for the ringtone and proceed to set the volume.
5. Use the left or right navigation button to set the ringtone volume as required. Select
Select to save the settings and return to the upper-level menu.
NOTE
If you turn the ringer off, when a call comes in, the handset does not ring. Instead, an incoming call message
is displayed on the LCD.
7.2.2 Setting the Key Tone
1. In standby mode, press MENU to display the main menu.
2. Use the navigation buttons to highlight Sound, and then select Select or press OK.
3. Use the down navigation button to highlight Key tone, and then select Select.
4. Use the up or down navigation button to highlight ON (enabling the function) or OFF
(disabling the function). Then select Select.
eSpace 8850 Video Phone
User Guide
7 Using the Cordless Handset (Sold Separately)
Issue 08 (2014-08-25) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
62

Table of Contents

Related product manuals