Huawei FusionModule5000 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2 Routine Maintenance
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
30
Maintenan
ce Item
Maintenan
ce Period
Method
Expected
Result
Exception Handling
SYS
indicator on
the switch.
indicator is
blinking
green.
the board power supply is
abnormal when the switch
is configured with one
PSU.

Steady red: The possible
causes are as follows:
Two PSUs configured on
the switch are detected, but
the circuit breaker is off.
The power supply is
disconnected.
Both the board and power
over Ethernet (PoE) power
supplies are faulty.

Steady orange: When the
switch is configured with
one PSU, the PoE power
supply is abnormal. When
the switch is configured
with two PSUs, the board
or PoE power supply is
abnormal.
Take corrective measures
based on the SYS indicator
status:

Off: The switch is not
running.

Steady green: The switch is
not running properly or is
starting.

Steady orange: The
indicator takes a self-test
during startup.

Steady red: The switch
does not run properly after
being registered or alarms
indicating that the power
supply, fan, or temperature
is abnormal are generated.
2.6.3 Routine Maintenance for the VCN500
Table 2-17 Routine maintenance for the VCN500
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English