Huawei FusionModule5000 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2 Routine Maintenance
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
36
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng
referring to
ECC800
Alarm
Reference
V100R001.
Check the
availability of
the AC
actuator.
Semi-annually
On the WebUI
of the ECC800,
choose
Monitoring >
Aisle > AC
Actuator
Group > AC
Actuator to
enter the
Controls page,
and remotely
control the
lights.
Lights in the
smart module
aisle can be
normally
controlled
through the AC
actuator.
If the lights
cannot be
normally
controlled,
check whether
the AC power
cable to the
lights is loose
or
disconnected. If
so, reconnect
the cable. If
not, replace the
AC actuator.
2.6.11 Routine Maintenance for Cameras
Table 2-25 Routine maintenance for cameras
Maintenance
Item
Maintenance
Interval
Operation
Expected
Result
Troubleshooti
ng
Camera
availability
Semi-annually
On the NetEco,
choose
Configuration
> Camera
Management >
Video Camera
Management
to enter the
camera
management
page. Type the
camera name or
IP address to
find the camera,
and click the
camera name or
icon on the
left to view the
real-time
monitoring
page.
A monitoring
page is
displayed.
If the
monitoring
page is not
displayed,
check whether
the IP address is
correctly set
and the power
over Ethernet
(PoE) function
is enabled on
the LAN
switch. Then
check the
cables or
replace the
camera. For
details about
how to replace
a camera, see
5.5.25
Replacing a

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English