Huawei FusionModule5000 Maintenance Guide

FusionModule5000 Smart Modular Data Center
Maintenance Guide (ECC800)
2 Routine Maintenance
Issue 01 (2019-03-05)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
40
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng

If the ALM
indicator is
steady on,
clear the
alarm by
referring to
ECC800
Alarm
Reference
V100R001.
Check the
availability of
the skylight
actuator.
Semi-annually
On the WebUI
of the ECC800,
choose
Monitoring >
Aisle >
Skylight
Actuator
Group >
Skylight
Actuator to
enter the
Controls page,
and remotely
control the
skylight.
The skylight in
the smart
module aisle
can be normally
controlled
through the
skylight
actuator.
If the skylight
cannot be
normally
controlled,
check whether
the cable
between the
skylight
magnetic lock
and actuator is
in good
condition and
securely
connected. If
so, replace the
skylight
magnetic lock
or actuator.
Check the
availability of
the magnetic
lock.
2.6.16 Routine Maintenance for the Access Control System
2.6.16.1 Routine Maintenance for the Access Actuator
Table 2-30 Routine maintenance for the access actuator
Maintenance
Item
Maintenance
Period
Operation
Standard
Troubleshooti
ng
Check the
indicator on the
access actuator.
Quarterly
Observe the
PWR, RUN,
and ALM
indicators.

If the green
PWR
indicator is
steady on,
the power
input is
normal.

If the RUN
indicator is
off, the
power is

If the PWR
indicator is
off, check
whether the
communicat
ions cable is
loose or
disconnecte
d or whether
the smart
ETH

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English