Huawei Quidway S2000-EI Series User Manual

Installation Manual
Quidway S2000-EI Series Ethernet Switches Chapter 4 Powering on Switch for the First Time
4-3
Figure 4-3 Setting the serial port to be used in HyperTerminal connection
3)
Click <OK> after the serial port is selected and the system will pop up the
following interface. Set the baud rate to 9600, data bit to 8, parity to none,
stop bit to 1, and flow control to none.

Huawei Quidway S2000-EI Series Specifications

General

Brand	Huawei
Model	Quidway S2000-EI Series
Category	Switch
Language	English