Figure 13-54 Holding the male and female unshielded connectors
Step 2 Feed the male connector into the female connector, as shown in Figure 13-55.
Figure 13-55 Feeding the male connector into the female unshielded connector
Step 3 A crisp click indicates that the connector is locked by the locking key. Pull the connector
slightly and ensure that it is securely connected. Figure 13-56 shows an installed Ethernet
connector.
Figure 13-56 Installed unshielded Ethernet connector
S2700&S3700&S5700&S6700 Switch
Hardware Installation and Maintenance Guide
13 Appendix
Issue 13 (2017-11-20) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
131
To Next Page
Loading...
