Step 16 Remove the CPU tray.
Figure 5-96 Removing a CPU tray
Step 17 Remove the RAID controller card. For details, see 5.14 Screw-in RAID Controller
Card.
Step 18 Remove all PSUs. For details, see 5.7 PSU.
Step 19 Remove the riser modules. For details, see 5.11 Riser Module.
Step 20 Remove the rear drive modules. For details, see 5.19 Rear Drive Module.
Step 21 Loosen the screws that secure the cable organizer on one side of the chassis using
a Phillips screwdriver, and lift the cable organizer. See Figure 5-97. Remove the
other cable organizer using the same method.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 155
To Next Page
Loading...
