Step 11 Remove all fan modules. For details, see 5.10 Fan Module.
Step 12 Press and hold down the latches on both sides of a fan module bracket, and lift
the fan module bracket. See Figure 5-94. Use the same method to lift the other
fan module bracket.
Figure 5-94 Removing a fan module bracket
Step 13 Remove all cables from the mainboard. For details, see 3 Internal Cabling.
Step 14 Remove all DIMMs from the mainboard. For details, see 5.16 DIMM.
Step 15 Use a Phillips screwdriver to loosen the four screws on the heat sink and remove
the heat sink.
Figure 5-95 Removing a heat sink
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 154
To Next Page
Loading...
