Figure 5-105 Installing a CPU tray
Step 9 Install the heat sink and use a Phillips screwdriver to tighten the four screws on
the heat sink.
Figure 5-106 Installing a heat sink
Step 10 Install the DIMMs. For details, see 5.16 DIMM.
Step 11 Install the RAID controller card. For details, see 5.14 Screw-in RAID Controller
Card.
Step 12 Install the rear drive module or riser modules. For details, see 5.19 Rear Drive
Module or 5.11 Riser Module.
TaiShan 200 Server
Maintenance and Service Guide (Model 2280) 5 Removal and Installation
Issue 04 (2020-01-16) Copyright © Huawei Technologies Co., Ltd. 161
To Next Page
Loading...
