Huawei UPS2000-G - Page 117

Figure 5-44 Shutdown screen
Replace Batteries
If the batteries have been replaced for the system, set this parameter. The
parameter is congurable in non-battery inverter mode or non-battery ECO mode.
Figure 5-45 Replace Batteries screen
Maintain Batteries
● Shallow Discharge Test
Figure 5-46 Shallow Discharge Test screen
● Capacity Test
After you completely discharge batteries, the load rate must be in the range
of 0%–100%.
● Stop Test
Figure 5-47 Stop Test screen
This item allows you to stop the shallow discharge test or capacity test.
● Manual EC for Pos.
Figure 5-48 Manual EC for Pos. screen
UPS2000-G-(6 kVA–20 kVA)
User Manual (Lead-Acid Battery) 5 Control Panel
Issue 23 (2024-03-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 109