Huawei UPS2000-G - Clearing the Alarm Tone

To Next Page

To Previous Page

H Transferring the UPS That Has

Generated an Alarm to Normal Mode and

Clearing the Alarm Tone

Procedure

Step 1 Press the INFO button to conrm that the alarm is generated for the bypass

power supply.

Step 2 Press the OK button for 5 seconds or enter the control screen to start the inverter.

Step 3 Verify that the alarm is cleared and the alarm tone disappears.

----End

UPS2000-G-(6 kVA–20 kVA)

User Manual (Lead-Acid Battery)

H Transferring the UPS That Has Generated an

Alarm to Normal Mode and Clearing the Alarm

Tone

Related product manuals