Huawei UPS2000-G - Communication Card Screen

Table 5-14 Basic Settings
Item Description Default
Value
Value Range
Languag
e
- English Chinese, English,
Turkish, French,
Russian
Change
Password
To change the preset password,
choose Settings > Basic
Settings > Change Password.
The password allows you to
enter the Settings screen.
000001 -
Change
Feature
Code
You can change the feature
code by choosing Settings >
Basic Settings > Change
Feature Code. The feature
code is used to restore the
preset password.
999999 -
5.6.3.2 Communication Card Screen
1. If an SNMP card is connected, set the following parameters:
Figure 5-24 SNMP card settings
UPS2000-G-(6 kVA–20 kVA)
User Manual (Lead-Acid Battery) 5 Control Panel
Issue 23 (2024-03-15) Copyright © Huawei Digital Power Technologies Co., Ltd. 83